Zombicide / Last Days: Pitter Patter, let's do some Scatter! --- Terrain

Doing some more paint desk cleanup this past few days, I have been finishing off some Scatter terrain, mostly for Zombie or Apocalypse gaming.

 

This is a mix of some Walking Dead mattress covered barricades (Mantic), some garbage bins (picked up in a swap -  so not sure the company) & some tires which were 3d printed. These tires were actually part of other barricade pieces but snapped off while washing & cleaning the prints...so now I have some random tires to lay on the board.

 And the same terrain with some figures added for scale. 

 

I have a bunch of the 3d printed terrain scatter I am currently working through. Then its onto a 3d printing / painting contest I want to participate in. I am currently printing out the piece from LV-427 now. 

Stargrave - Raised Platformer!

 The past couple of weeks I've been working (my inner voice says struggling) on an older Platformer plastic kit I picked up years ago. Finally a reason to get it built!

 

I wanted to make a small raised landing / cargo drop with the platform kit. So snipping all the parts, & then "snapping" the connectors together as the box says "no glue needed" I then felt I was ready.

Laying out the parts I started  trying to snap the tiles together..hmm not going as smoothly as I thought. No worries, I will just get the general idea layed out & then paint. Definately need to do warning strips....yep, those take awhile. OK time to get them all together.....wait, I don't seem to have enough T-connectors. OK I can just leave out 2 of the corner tiles & use those locations for the ramps.

Getting the pad finished, it then needed to be raised onto the rail posts. More snapping together, wait that one is skewed...twist & SNAP. Off breaks off the post inside the base. I will just superglue that post back on. Ugh...more delays.

However in the end it was put together....its a bit wobbly at the connector locations. I think this really just needed to be glued together! It is however functional, though it will not be getting any travel trips from the basement.

For those who find this kit & plan to use it, just be warned....you really will want to lay everything out to make sure you have enough connectors. Decide which face of the various tiles you want to have faceup, as you won't be using the other side. GLUE it together when satisfied & all will be good! As the final slap, the humidity today caused the matte spray to frost a bit, but when I look at it....it almost appears like built up dusty grime, so I am not totally disappointed.

As a final bit to today's post I cleared another 2 crate sets from my paint table, they were much easier!

Thanks as always for visiting.

Stargrave - Last of the Rust Piles

Having this week off, I got a bit of painting in today & completed the last of the Scrap Piles. Again it was obviously made for use in Star Wars Legion, but whose to say those types of ships, conveniently painted in different colours couldn't be in Stargrave?

 This was another of the original ones I got of Thingeverse. I went to look back for the file to share, but had no luck. I think the originator remade them & this 1st edition one got sidelined.

 

And of course I couldn't show it without a figure for scale.

 

Thus ends my last project of Scrap Piles, onto the next! Thats it for today, thanks for visiting! 

Stargrave - Someone Else's Scrap...Well you know

Had a good paint session today & managed to complete 2 more of my Space Junk piles.

 As the others these are from Thingeverse & 3d printed on my FDM printer. This first one is an older stl file, which I could no longer find to give credit to the maker...so if your looking at it, by all means let me know!

 

They have a Star Wars flair, but thats fine by me.

 

Here is is with a figure for size comparison.

 

The next is the 3rd of a 3 file set which I have given credit too & shared the link back when I first posted the small one.

 

This is the Large scrap pile!

 

And a figure for scale. Won't be many seeing over this to discover whats waiting on the far side!

 

Hope to get some more painting done this week as we are taking a vacation to ride he tails of the long weekend we are celebrating here. I currently have 1 more scrap pile that needs to be finished, then I can focus on some other Stargrave related projects!

Thanks for visiting